Give your Toyota Hilux N70 KUN26 4WD more confident road manners and suspension control with a Bilstein B6 suspension package from PPD Performance NZ. Bilstein gas-pressure dampers help manage bounce and body movement over uneven roads, gravel, corrugations and off-road tracks. Select the front springs and rear constant-load rating that suit your Hilux and the equipment you regularly carry.
The front strut assemblies are supplied fully assembled by Wilkinson Suspension in Australia, with Bilstein B6 struts, matched King Springs raised front coils, new top mounts and assembly labour. You receive assembled units rather than loose front strut parts.
At the rear, Australian-supplied Bilstein B6 shock absorbers are paired with RAW 4x4 leaf springs sourced locally through Autolign NZ. This arrangement helps keep bulky rear spring supply within New Zealand and gives you three options for different constant loads.
Rear leaf springs provide an approximate 40–45 mm raised ride height, depending on the model, fitted accessories, age and constant load. The advertised front lift height does not imply a 75 mm rear lift. Rear spring load ratings do not increase Toyota axle or GVM limits.
This 50 mm front lift kit does not include coil strut spacers, a differential drop or aftermarket upper control arms; none are charged in the package. Check suspension travel, steering geometry and wheel alignment after installation.
For applicable Toyota Hilux KUN26 / N70 4WD vehicles (2005–2015). Confirm the exact vehicle, front accessories and permanent rear loads before ordering. Actual lift depends on vehicle setup and installation. Check New Zealand LVV certification requirements for your intended configuration, particularly higher lifts; professional installation and alignment are recommended.
Wilkinson supplies the assembled front struts, rear shocks and the 75 mm geometry components where selected. PPD Performance NZ sources the RAW rear leaf packs and fitting components locally through Autolign. Current availability and collection or dispatch arrangements within New Zealand depend on component supply.
Installation, alignment, certification and other correction parts not expressly listed are not included.