Ford Ranger (2022-2025) Wildtrak OzRoo Tub Rack

OZROO TUB RACK FOR WILDTRAK

Want more storage and to maintain use of your ute tub? Want to run a roof rack and a tub rack? Need a spot to mount your awning or roof top tent? Have too much gear for the back of the ute? Load up for your next trip or adventure with the OzRoo Tub Rack

PLEASE NOTE: ALL WILDTRAK BRACES CURRENTLY REQUIRE REMOVAL OF FACTORY WILDTRAK TIE DOWN POINTS.

(06/10) PRODUCTION UPDATE: PLEASE NOTE THESE ARE ALL IN STOCK EXCEPT THE HALF HEIGHT TUB RACKS WHICH ARE ON PRE-ORDER DISPATCHING WEEK 29/11 (Delayed from 13/11 on 8/11).

*Note: Photos of full cab length racks coming soon. Currently shown as 3/4 length rack.

The OzRoo Tub Racks are constructed from high tensile, reinforced steel and are finished in multistage powder coat to offer the ultimate in utility, durability, functionality and appearance.   For the Ranger Wildtrak you have two options to suit the factory sailplane; 1. Half height, to sit below the sailplane and run the whole length of the cab 2. Full height, 3/4 cab length (110cm long) to suit sitting the same height as the sailplane but sitting behind it.   MOUNTING THE RACK ON A ROLLER COVER? DON'T FORGET TO PURCHASE THE ADDITIONAL ROLLER-COVER SUPPORTS!   THESE ALLOW ADDITIONAL WEIGHT TO BE LOADED ONTO THE ROLLER COVER:  https://ppdperformance.com.au/products/ozroo-tub-rack-braces-for-ford-ranger-wildtrak

RATED TO 400kgs - PERFECT FOR A ROOF TOP TENT!

Designed specifically for the Australian Ute, they are supplied complete with all fitting accessories, and offer easy direct mount fitment, and these market leading features

These versatile racks, accept most popular accessories, including awnings, hi-lift jacks, spare wheels, jerry cans and more. Uniquely designed for Australian conditions, with class leading strength and protection, all covered by our fuss free two year warranty. Tub Racks are simply one of the best 4x4 accessories available to increase storage and utilisation of Ford Ranger for off-road adventures and touring.

Technical Specifications:

Half height racks:

• Length of the rack - 126cm
• Width of the rack - 145cm-180cm
• 50mm distance between adjustment holes.
• 3 holes of adjustment on the lower arm
• 3 holes of adjustment on the upper arm.
• Maximum height 350mm above tub
• Minimum height 200mm
• Includes one side bar

Full height racks (3/4 cab length racks):

• Length of the rack - 110cm
• Width of the racks: 145cm-180cm
• 50mm distance between adjustment holes.
• 6 holes of adjustment on the lower arm
• 6 holes of adjustment on the upper arm.
• Maximum height 650mm above tub
• Minimum height 400mm
• Includes two side bars. 

Full height racks (Full cab length):

• Length of the racks: 126cm
• Width of the racks: 145cm-180cm
• 50mm distance between adjustment holes.
• 6 holes of adjustment on the lower arm
• 6 holes of adjustment on the upper arm.
• Maximum height 590mm above tub
• Minimum height 400mm
• Includes two side bars.

OzRoo, For Australian Conditions - Proudly distributed by PPD Performance
*Please note the weight rating is contingent on correct installation at a non-maximum height. The weight rating is slightly degraded at maximum height.
* Please note, the factory mountain top cover may need extra support if you intend to run full weight ontop of this. Please contact mountain top for the rating of their cover.

Wildtrak Brace 

Ford Ranger (2022-2025) (PAIR) Wildtrak  OzRoo Tub Rack Support Braces New Generation

Want more structural support on the wildtrak sailplane?
Want to run a tub rack? 
Load up for your next trip or adventure with the OzRoo Tub Rack

The OzRoo Wildtrak Support Braces are constructed from high tensile, reinforced steel and are finished in multistage powder coat to offer the ultimate in utility, durability, functionality and appearance.

For the Ranger Wildtrak you have a factory limitation of ~100kg* on the sailplane.
These have been prone to bending/deforming overtime in use with racking.
Because of this OzRoo has developed some strengthening braces to help alleviate this.

ENGINEERED TO 150kgs - PER SIDE - PERFECT FOR A ROOF TOP TENT!

Testing completed to AS / NZS 1170.0:2002 

Designed specifically for the Wildtrak Ute, they offer easy direct mount fitment, and these market leading features

Uniquely designed for Australian conditions, with class leading strength and protection, all covered by our fuss free two year warranty.  

Important notes

J-brace kit is recommended by ford for carrying loads over 45kg on the tub.
The EGR j-brace kit can be found LINKED HERE