Ford Ranger (2011-2015) Dual Cab Yakima Platform Ruggedline® Roof Rack available on AfterPay. We deliver Australia-wide! – Sydney, Brisbane, Melbourne, Adelaide & Perth.
Ford Ranger (2011-2015) Dual Cab Yakima Platform Ruggedline® Roof Rack
Please note: For a full setup you will need all three parts; A Platform, a track and a Mount. The track is installed into your roof, the mount sits within the track then the Platform is attached to it.
THE UNIQUE LOCKNLOAD™ PLATFORM
Innovative, tough, east-west slats enable you to carry all types of gear.
Built-in perimeter channels allow additional positions to mount your accessories.
Constructed from powdercoated aluminium with superior e-coating that gives the LockNLoad Platform the best performance in the toughest conditions.
RACK TECH EXPLAINED
Applicable to all Yakima LockNLoad Crossbar and Platform load carrying systems.
Confused by how much weight you can actually carry on top of your vehicle? Don’t worry, so are most of us, but this helpful guide should help you calculate this.
If still in doubt, please drop us a line using our online contact form and we will walk you through this.
When trying to calculate how much weight you can carry on top of your vehicle there are few key factors to take into consideration:
RUGGEDLINE® HAS ARRIVED...
RuggedLine® is a premium platform-to-vehicle mounting system, designed and tested in Australia.
Constructed from powdercoated stainless steel for ultimate reliability, RuggedLine is ready to be paired with the existing (and proven) range of LockNLoad Platforms.
The strength of RuggedLine also boasts a modern look designed, and topping this off is premium spec automotive badging in blackened chrome.
THE UNIQUE LOCKNLOAD™ PLATFORM
- Innovative slats with 21 mm accessory slots
- Beefy profile is built to last and looks just as tough
- East-west slats allow more flexibility to fit your accessories
- Versatile perimeter mounting tracks for more ways to mount your accessories
- Corrosion resistant powdercoated aluminium and additional e-coating
- 7 latitudinal slats
PLATFORM-TO-VEHICLE MOUNTING SYSTEM
- Designed and tested in Australia
- Extensively tested for off-road performance and wind noise
- High-end blackened chrome Yakima badging
- Constructed from powder coated stainless steel
- The larger hexagonal cut out design allows for better access, and easier installation
- Modern, faceted and angular aesthetic aligned with current automotive styling
- Tools for assembly supplied
Platform A - 1240 x 1530 
LockNLoad Track Kit Ranger/BT-50 DC 2011- 
Platform A 1240 x 1530 mm (Pre-assembled)
|Mount Type:||Track Mount|
|Product Load Rating:||
Please refer to the vehicle manufacturer specifications for max load capacity of vehicle. The lowest load rating applies. Reductions may apply off road. Learn more.
|Total Product Weight:||
27.6kg (1240x1530 platform)
|Retail Part No.||
YRGL017A (1240x1530 platform)
Attaches with permanent tracks riveted to roof. RuggedLine® can be removed.
Alternative Platform Sizes:
|Platform A||1240 mm||1530 mm||9820337|
|Platform B||1380 mm||1530 mm||9820338|
|Platform C||1380 mm||1930 mm||9820339|
|Platform D||1430 mm||2130 mm||9820340|
|Platform E||1240 mm||2130 mm||9820341|
|Platform F||1570 mm||805 mm||9820342|
|Platform G||1570 mm||1390 mm||9820343|
|Platform H||1570 mm||2130 mm||9820344|
|Platform I||1650 mm||1390 mm||9820345|
|Platform K||1240 mm||1390 mm||9820347|
|Platform L||1380 mm||1390 mm||9820348|
|Platform N||1380 mm||2130 mm||9820373|
|Platform P||1300 mm||1930 mm||9820375|
|Platform S||1485 mm||1530 mm||9820378|
|Platform U||1485 mm||2130 mm||9820380|
|Platform X||1410 mm||1390 mm||9820383|